Specially designed devices that hold trucks or trolleys in a fixed position during loading or unloading. They are designed to enable a quick and easy change between the locked and free movement modes.
BZTL series truck locks are of a pressed steel construction with a zinc-plated finish (excluding BZTL4 which is cast iron with a black finish).
For full details, including dimensions and part numbers, please open or download the PDF
SELECT TYPE:
Mounting height (mm)
Retracted height (mm)
Plate type
Product code
All BIL truck locks are top plate mounted and bolted to the underside of the trolley. The principle on which they work requires a constant gap between the unit and the floor, so it is best to mount the truck lock close to a castor, ensuring that it does not interfere with the free movement and operation of the castor. The mounting height shown in the table above is the gap between the truck lock top plate mounting surface and the floor. This is critical to correct operation – mounting pads, between the top plate and underside of the trolley, may be necessary to achieve this.
A step down foot-operated pedal moves a skid-resistant rubber pad into friction contact with the floor surface. This is done with a spring-loaded over-cam mechanism that does not lift the load and keeps the operating force low. It also means the load rating of the trolley is not relevant to the truck lock. A second step down pedal raises the footpad. The limited number of parts means there is less to maintain or go wrong.
Where a trolley has four swivel castors, two truck locks are required – one to be fitted at each end, either on the same side or diagonally opposite. Only one truck lock is required at the swivel end of a trolley that has two swivel and two fixed castors.
Fixing types:
up to £99=nil
£100-£249=15%
£250-£499=20%
£500-£999=25%
£1k-£1.49k=30%
£1.5k-£2k=40%
CURRENCY
YOUR TROLLEY
You
currently have 0 ITEM in your
Shopping trolley £0.00
Call now
on: 01249 822 222
BIL
CASTORS & WHEELS DIVISION
A division of Baz-Roll International
Ltd Porte Marsh Road, Calne, Wiltshire SN11 9BW United Kingdom
Tel: +44 (0)1249 822 222 • Fax:
+44 (0)1249 822 300 •www.bilgroup.eu•sales@bilgroup.eu Registered in England No: 2603821 • VAT
Reg: GB572705729
